Halo Jellie Glue 15g

Our unique formula of Halo Jellie Glue in a pot means it has an unusually thick consistency, allowing the user to scoop it up using their chosen Halo Jellie Tip for the perfect amount! The thick consistency fills any imperfections in the client’s natural nail, plus there are no dangers of air bubbles getting caught between the nail and Jellie Tip, meaning less chance of lifting and a longer lasting manicure!

Flash curing is easier than ever with this glue since the tip does not need to be held in place – simply glue and cure in a Halo Smart Lamp Pro or Flash Cure Lamp. Alternatively, the nail tech could also opt to cure all 5 fingers at once for a quick and easy service.

How do I apply Halo Jellie Tips?
Complete prep and cuticle work as normal, on clean and natural nails. Remove any debris from nails, using a Halo Plush Brush and Halo Prep & Scrub.

Size the Halo Jellie Tips to your client’s nail beds, ensuring they fit perfectly from side wall to side wall, without needing to push the tip flat to the nail bed.

Apply Halo Flexi-Bond or Halo Rubber Base Coat to the nail and cure for 30 seconds.

Scoop a small amount of Jellie Glue onto the contact area of the Jellie Tip.
– Alternatively, if opting to use Jellie Brush on Glue, paint glue onto the contact area of the Jellie Tip.

Place the Jellie Tip on to the nail plate by tilting the tip at an angle, placing the cuticle area first. Slowly press the rest of the Jellie Tip down so that it fits perfectly with no air bubbles. Remove any Jellie Glue that may have escaped from under the tip.

Hold the Jellie Tip down and flash cure, using a Smart Dual Cure Lamp or a Flash Cure Lamp. Once all tips are applied, cure the whole hand for 30 seconds.

Cut the Jellie Tip down to size and shape if required. Buff over the Jellie Tip to remove the shine and carefully around the cuticle area to ensure it sits flush.

Apply Prep & Scrub using the Halo Plush Brush to remove any dust and debris. Apply Halo Base Coat, colour of choice and top coat, curing each layer for 30 seconds.

Allow the nails to cool down for two minutes before applying Halo Cuticle Feed.

How do i remove Halo Jellie Tips?
Break the Jellie Tips seal using a Halo Elite Buffer File.
Cut away any additional length of the Jellie Tip.
Using your preferred method of removal, soak off the Jellie Tips the same way you would soak off a gel polish.
– Top Tip – we recommend using a heated soak off bowl and Pure Nails Acetone!

How do I maintain Halo Jellie Tips?
Clients with Halo Jellie Tips should come back for a maintenance appointment every 2-3 weeks.
You can infill the Jellie Tips with Halo PoliBuild, Halo Elite Hard Gel or Halo EasiBuild.
Alternatively, we suggest removing and reapplying.